Capsule is not perforated
If the capsule is not perforated after inserting, please smooth down the edge of the capsule and try it again.
Flowmeter error message
If you receive a “flowmeter error message”, please try following options:

Switch the machine off and back on. Make sure that all levers are closed, when you do a cold boot. The levers should stay closed until the cold boot is over.

Close the brewing unit without inserting a capsule and press the coffee button. Afterwards open the lever.

Water underneath the machine
If there is water underneath the machine, please remove the capsule drawer and check the connection of the tubes, which are located behind the drawer.
If these tips don't help you to achieve the desired solution, please call our customer service daily from 09:00 to 17:00 at 0120-35-7202. We will be happy to assist you.

Aguila 440 | Coffee Machines | Nespresso Professional JP